KMC 2600
Details
12’ of reach, 140° swivel. This machine adds added versatility by allowing the operator to move the boom sideways to grab out of reach timber, maneuver it around obstacles, or to shift the weight of the machine when on soft/wet ground and steep slopes. This machine is more suited for steep slopes and felled wood then the conventional arch grapple.
- Gross Vehicle Weight: 37,180lbs (16,862kg)
- Ground Pressure: 6.40psi at 0” soil penetration, 5.79psi at 6” soil penetration
- Engine: Standard - Cummins 6BTA5.9 174HP
- Option - John Deere 6068T 185HP (for John Deere Dealers)
- Transmission: Clark HR28420-7, 4 Speed Powershift
- Final Drive: Planetary
- Fuel Tank Capacity: 45 to 70 gal (205 to 318L)
- Service: Hydraulic, Oil Cooled Multiple Disk In Transmission
- Differential: Hydraulic Steering Cylinders, When Pulled Back Simultaneously
- Parking: Manual, Transmission Mounted
- Engine: Rpm, Hours, Coolant Temperature, Oil Pressure
- Transmission: Oil Temperature, Oil Pressure
- Differential: Oil Temperature
- Battery: Amp Meter
- Other: Low Fuel, Parking Brake
- Suspension: Torsion Bar Sprung, Independent Road Wheels
- Road Wheels: 100% Cast Steel, 5 Sets of Dual Wheels Per Side, 24" (610mm) Dia.
- Track: Manganese Alloy Cast Steel with Rubber - Bushed Pins, 22" (559mm) Wide
- Sprockets: Hardox 400 Steel
- 1st Gear: 2.2 mph/3.54 kph
- 2nd Gear: 4.6 mph/7.40kph
- 3rd Gear: 8.0 mph/12.87 kph
- 4th Gear: 14.5 mph/23.33 kph
- Joystick Control - Electronic Shift
- Oil Cooler for Differential and Transmission
- Two Stage Air Cleaner
- Windshield Wiper and Washer
- Fire Extinguisher (2 X 5lb)
- Horn and Back-Up Alarm
- Tool Box And Tools: Track Jacks, Road Arm Lifter, Slide Hammer and Pin Punch
- Operator/Service Manual and Parts Books
- Air Conditioning, or Cab Pressurizer
- High Output Heater - 20,500 BTU
